Top 3 Types Of Well Water Pumps You Should Know

In some states of a country, finding portable water seems to be a hot favorite among certain families. One of their top picks is getting their water supply from their private wells. Gaining access to water sources like the aforementioned are very important to those who constantly live out of town. After searching for a viable spot to build a well, a pump must be inserted on the top to extract the water they need. Here are the top 3 types of well pumps that every private well owner should know about.

Centrifugal pumps


Centrifugal pumps are only used for shallow wells that are no more than 25 feet deep. The aforementioned depth is its effective range to generate enough suction force to lift the water up to the surface. It has only one pipe that is inserted into the well borehole and into the water column. Since they are smaller in size, they cost less and are easy to maintain.

Submersible pumps

Submersible pumps are considered to be the most popular choice for a well pump as they can be used in deep and shallow well operations. Because they are designed to be used as underwater units, their watertight properties ensure that there will be no electrical contact with the water source, as well as the elimination of potential water leakages. Its higher powered suction pumps allow it to transport water for a further distance, thus making it suitable for deep wells.

Jet pumps

This pump comes in two versions, the deep well and shallow well jet pump. A shallow well jet pump basically shares the same properties and function of a submersible pump and its suction length is no more than 25 feet. Its mechanical systems are simpler than its other counterpart, thus little maintenance is needed. If you are budget conscious, this is the version to go for.

Deep well jet pumps are much more powerful than the aforementioned pumps. This time round, there will be two pipes within the well borehole. One pipe is used for suction purposes and the other returns water to operate its jet units. The jet units are installed in the well borehole below water level. The pump forces water down its primary pipe and back up through its secondary pipe; lifting water from more than 50 feet below. The pumps can also be upgraded to lift water up from more 100 feet below.

Include a water storage unit

You should not rely on the pumps by thinking that it is supposed to run continuously. For example, thinking it will activate when you flush a toilet – that’s not always the case. In order to provide undeviating water pressure at fixtures like your toilet, the pump must first transport water to the storage tank. Modern storage tanks have an air bladder that automatically compresses when water is pumped in. Hence, pressure accumulates in the tank and that pressure is used to move water throughout your home’s plumbing system.

Always consult an expert to determine which pump suits your well the best. Make informed decisions so you won’t regret over a wrong purchase in the future.

Water Conservation Tips For Your Well Water

Water is one of our most precious natural resources, and it is considered a terrible deed to squander it senselessly without a proper direction or cause. Fresh or pure water supply isn’t unlimited and it is up to us to ensure that our future generations get to enjoy the benefits of it. Hence, it is important that you learn how to get back to the basics of water conservation. Here are the five great water conservation tips for your well water:

Keep unnecessary water flow to a minimum

It is a good practice to alternate between taking baths and showers. Limit the time that you spend using the well water, if you plan to take a shower. Just like how you were taught as a kid, never allow constant running water when you are brushing your teeth, applying soap on your body and shampooing your hair.

Check for the presence of leaks indoors and outdoors


Just like how credit card bills snowball from its hefty compound interests, a small leak can undergo a similar snowball effect and accumulate huge costs in the long run. Check your amenities and bills that indicate excessive water usage.

One bucket of water and its multiple uses

After you shave, rinse that razor in a cup of water and nothing else. When you need to mop, use only one bucket of water. Single pieces of clothing should be hand-washed with minimal water usage, while dryers and washers can be activated only when there is a full load. Use a trash bag to dump all your cigarette butts, instead of flushing it down the toilet every single time.

Water that has been used to rinse your vegetables can be used to water your plants afterwards. Try to wash your car on an uphill slope, to allow water to flow down in a single direction – removing the need to hose down your car unlike usual circumstances.

Store jugs of drinking water in your fridge

If you have a well, you will probably get your drinking water from it, and you may need to wait awhile before the well water turns cold on a hot day. Instead, storing jugs of cold water in the fridge saves them the trouble and time for a cool drink. The less you draw from the well, the more water you tend to save.

Gardening tips – water your plants early in the day

When early morning temperatures are still cool, there will be less chance of evaporation when you water your plants. You can also prevent the growth of fungi and keep certain pests away. Avoid watering during windy weather conditions as it tends to blow the water off target and encourage faster evaporation to take place, thus requiring you to use more water to get the job done.

There are many more tips to help you conserve your well water, but these are the top 5 that can help you get started quickly. The process of conserving water is not too complicated and individuals can start from any age to cultivate good habits. The greatest gift we can give back to Earth is to work together hand in hand taking small steps like these.

Purify Your Home’s Well Water Supply With A Filtration System!

Water filtration systems are used to remove impurities from your water supply to the best of its abilities. It may involve a physical barrier and possibly a chemical process to rid any elements that may affect the quality of your water. One of the most important things that must be achieved is to ensure that the water is safe for consumption and use when coming into contact with one’s skin. Read on to find out more information about these water filtration systems!

How does it work?

The system uses a type of filter media to intercept the flow of water. This filter media stops potential contaminants from crossing over by physically blocking it, allows chemicals to adsorb, or a combination of the aforementioned processes.

All types of filter work almost the same way – it traps microscopic bacteria such as Cryptosporidium and Giardiasis, preventing you from ingesting it. The filter system utilizes an intake hose to draw water from the source and into its filter membranes. However, these bacteria are not killed, just trapped with the other debris, and it is enough to allow clean water to pass through its filter outlets. Once it is out of the aforementioned system, it is up to the user on how the clean water should be utilized.

The filtration process could start from the well water pump, making sure everything is cleaned before it is dispensed for your usage.


Caring for the filtration system

The filters may eventually clog, and usually you will notice that it gets increasingly harder for it to pump new water into it. Never force water through the pumps under this circumstance. Instead, adhere to your manufacturer’s instructions for best results. Well, you should have already acquired a basic understanding about the system and now you should know the most common reasons on why it should be used!

Reasons why well water filtration systems should be used

• Keeping cancer under control

Toxic materials that are found in drinking water are linked to several types of cancer. Ensure that none of these materials enter your water source, that’s intended for personal consumption.

• Protecting your children

EPA has shown reports that lead contents that are found in drinking water contributes significantly to more than 450,000 cases of dyslectic children annually in the US alone.

• Stop the spread of diseases

Even developed countries can be affected by epidemic diseases through water contamination.

• Prevent birth defects

Pregnant women should never drink water that potentially contains lead, not even the slightest bit! Instead, pure drinking water supply should be made available to them.

• Making tap water safe to drink

Untreated tap water may contain over 2,000 forms of contaminants. Ingesting it brings about detrimental effects to one’s health, especially if it is consumed on a regular basis.

Hire a professional to do a thorough water test and see if he or she gives you the all clear, that the water is safe for consumption. Every effort that’s put into your vigilance goes a long way for your loved ones and yourself.

Drilling For Water – Top 5 Questions To Ask Before Getting A Well


Homeowners, who are first-time buyers of private wells, need to clarify all their doubts before making any decisions for an actual purchase. They need to touch upon topics such as legal procedures, costs, the lead time, being considerate to their surroundings and etc. You need to source for information that’s most relevant to the state that you currently reside in. Here are the top 5 questions to ask your well builder and yourself, if you are living in Connecticut (CT).

What’s the cost of a well in Connecticut?

The price for drilling a well in CT depends on many factors other than the drilling process itself. You may have to consider certain options such as the addition of a well casing – galvanized steel for longevity and ability to prevent cracks, rusts or leaks. To put it in rough figures, you will be spending an average $12 per square foot – total square foot also depends on the depth of your water well.

What’s the expected lead time for the installation?

The duration is determined by geographical conditions and the toughness of the ground that’s needed to be drilled. Different drilling methods also affects the overall lead time, but when it is used correctly, it can save both the drillers and the potential owner a lot of time. For example, a well that needs to be drilled in an area with the presence of hard rocks, and a Down Hole Air Hammer drill rig is used to effectively break through the rocks.

What do I need to ask from my neighbors?

Your neighbors will most probably have their own water wells too, and building a well of your own should not be a biggie to anyone. If you are building one where older wells already exist, and even if the wells have records that boast of an abundance of water supply, ask someone who lives nearby if the aforementioned is true. If not, you may want to reconsider the spot that’s going to get drilled.

How often and when does it require maintenance?

Well, pumps can last an average 8 to 10 years, before it needs to be replaced with a new one. When you get your pumps inspected, make sure you do the same for your well casing, as well as the testing of your well water’s quality and pH levels. You do not want to drink anything that’s harmful to yourself. Negligence of the aforementioned may result in gastrointestinal illnesses to your family members and you!

How can I further protect my well casing pipes?

Consider using a vermin proof well seal. Nowadays, most new wells require this seal to prevent insects from penetrating through your new pipes and into your water source. Even if your well builder does not mention anything about this, request for one! Bugs and insects may carry germs and bacteria with them, and you wouldn’t want them getting near your water supply.

Don’t be afraid to ask any question that pertains to your water wells. Make sure to include the top five questions above, to keep yourself well-informed as an owner. These are also the foundation that helps owners maintain their water well systems in tip-top conditions.

What Should You Do When Water In Your Private Well Runs Dry In Connecticut?

Some homeowners in Connecticut have gone to great lengths to build their own water source that’s also drinkable. There are currently more than 300,000 private wells in the state and they serve 24% of its population. Since private wells in domestic households are not regulated by the EPA, owners are responsible for the quality of their own water source.

Unfortunately, some wells inevitably run dry in the presence of a drought. Usually, such problems are encountered every summer. On the other hand, your neighbors may not face the same problems as you did. Whatever the circumstances, you should know what are the right things to do during these dry seasons.

How do I know whether my well is drying up?

The Well at Kom Ombo

Weather trends from the past have showed that there has been an increase in the number of wells drying up during summer. You can also expect that water levels all across Connecticut to be at its lowest during dry winters and spring. If you hear weird sounds emanated by your water pump – mainly caused by bubbles when air is sucked up first – or frequent water outages, it is often a tell-tale sign that your well has difficulty keeping up with your demands for water.

You can also rely on your sense of taste to determine whether the water levels in your well are low. Water that taste dirty and muddy, often means it is drying up.

Not a drop left!

Before you commence your repairs, verify if the problem is a simple case of mineral buildup. Engage the assistance of a well technician to help you with the aforementioned. If there are no signs that indicate a mineral buildup, your well water pump might be damaged. Individual well components and parts are easy to replace and pinpointing specific problems can be friendlier to your pocket.

Unfortunately, some wells completely dry up and there is nothing more that can be done. If neighboring properties have encountered the same problem, you may wait it out until rainfall returns to moisten the soil as well as replenish your well’s water bed. This may take place just a few inches under the existing bottom, thus you might need to dig deeper to reach the new water source. If nothing else works, consider getting a new well altogether.

When will the existing conditions improved?

Weather conditions are unpredictable and no one has a definite answer. However, if there are no signs of improvement in your area, relief can be expected in the middle of October. The transpiration and evaporation process from plants greatly decline during this time of the year.

Meanwhile, conserve your water source

The less you use it, the less it is needed in the first place. You can try to cut down on the daily amount that is used to do your laundry, flush your toilets and cleaning up. Another neat trick requires you to evenly space out your water usage in timely intervals – lasting you the whole day without coming up short.

If you plan to build a well in your home, don’t forget to apply for a valid well permit. Majority of licensed well builders can do that for you. The permit lasts you a lifetime and it does not need to be renewed. Talk to us if you want to learn more.