Having a reliable well water filtration system is a challenge. There are so many products to choose from and there are so many different processes involved that sometimes it becomes either too much to handle or most of the time confusing. Getting quality water service is a priority and you want to make sure that you have the right product and the best water filtration system at home.
Having your own water source is important most especially at these times when water supply can sometimes run low. That’s why residential well water pump owners would encourage many to do the same and get their own well water pump. You just have to make sure you have the best well pump service and a water filtration system that would give you clean water for you and your family.
Well Water filtration system
Water filtration is the process of filtering out unwanted particles and pollutants from water. This is why it is so important. Well water may have a different smell and taste which makes it really dangerous for daily consumption if not filtered. So, if you have your own well water pump or you are planning to have one, we give you a complete guide on having the best water filtration system at home.
Set up for the Best Home Water Filtration System
Have a Sediment Filter
A sediment filter is used to trap and separate large particles like dust and sand. They act as a sieve to remove these sediments. They don’t remove chemicals or heavy metals that just make the water taste or smell better. You could either use a bag filter or a cartridge.
A cartridge filter is preferable for systems with contaminations lower than 100 ppm or lower than 0.01 % in weight. So make sure you get water testing services so you know if and when you need to use a cartridge filter.
Bag filters, on the other hand, are used for dust removal. The sizes of these pores are between 1-200 micron. The particles filtered are normally captured on the internal surface of the bag filter.
Get a Chlorinator
If you are extra concerned about bacteria, you should get yourself a chlorinator. This is a breakthrough when it comes to water disinfection because it uses sodium hypochlorite production at low salt level through electrolysis.
In this process, the water is exposed to low-voltage direct current between electrodes. The salts in the water between these electrodes are converted into disinfecting components. Electrolysis creates the sodium hypochlorite which kills a great variety of germs.
Get an activated carbon filter
Activated Carbon is described as “miraculous.” Why? It removes the unpleasant taste and smell of chlorine and also removes other organic contaminants. These are small pieces of carbon that come on granular or block form. The surface area of four grams of this is equivalent to a football field. This massive surface area allows it to be effective in adsorbing or removing contaminants.
When water flows, the chemicals stick to the carbon and this produces a cleaner, purer water supply.
Have a resin filter
Resin, also known as polymer, is a medium for ion exchange. It is used in purification and decontamination processes. It is commonly used in water softening and water purification. It removes the calcium and magnesium ions which causes hardness.
Have a reverse Osmosis filter
A reverse osmosis filter removes the saltiness or brackishness of water. This also makes sure you have outstanding drinking water. It is one of the most popular filtration methods out in the market. Water is forced across a semi-permeable membrane. This leaves contaminants behind and leaves the clean water behind. It improves the taste and odor, removes impurities, and it can be easily maintained.
Kinds of Well water filtration System
Whole house well filtration system/point-of-entry system
For whole house well water filters, having a sediment filter, a chlorinator, and carbon filter in one seamless model could be the best home water filtration system. Usually, these are attached to the pressurized holding tanks. This whole house well filtration system is also usually called the point-of-entry system. This can be quite complex but you can rest assured of clean and safe water.
An option for those who do not want a complicated set up would be to put major filters with the tank and add an individual well water sediment filter. This set up is called the point-of-use system. The downside of this is that you have to manually measure filters to fit faucets and taps to give you the water output you need.
It is really up to you and what you think best fits your home. The most important thing is you know for sure that you would invest in a water filtration system that works for you and your family. The choice is yours to make.
To get the best water output at home, make sure that you have a well pump service you trust. And while you are at it also make sure you also have a sewer pump service and water damage service as well. They will help make sure that your well water pump at home would indeed give you the desired quality of water you need. That and the water filtration system you have set up with definitely give the best quality you want.
Having your own water supply is good but having your own home drinking water filtration system will not only make you ahead of everyone else, but it will also make sure you don’t need to worry about the lack of the most basic need, water.
Contact our team today if you need assistance with any of this. All we want is to make sure you get what you want and what you need. Set up a system that works for you and your family not just for this day, not just for the year, but for decades to come.