If you depend on private water well for your domestic needs, you will need to be aware of the systems operation to make sure that you have adequate and good quality water. Regular well inspection is essential to resolve any issues that arise with the well system. If you are experiencing problems with your water system, you need to look for signs that the submersible well pump may be failing. You also need to look for any other issues that may be causing trouble and remember that you should always consult a professional well water system company.

You have no water in your home

An obvious sign that your well system has a problem is when there is no water coming from your taps. If you turn on the faucet and you have no water coming out, it is safe to conclude that you have a problem. Several factors can lead to this and they include a problem with the submersible pump. If the pump is not working effectively, you cannot access the water because it has no way of getting out of the well. A new water pump can help to solve the problem.

It is, however, important to note that lack of water can also be due to issues such as a clogged line, a broken pipe or a blown pump house fuse. Make sure that you check the most obvious or the easiest problems first before you decide that it is the submersible pump. If you have a clogged pump, you might not need to replace it. The clogging will interfere with the process, but cleaning it will solve the problem.

You are experiencing poor pressure

If when you turn on the faucet you have water but it comes with low pressure, you need to consider that your submersible pump is not working effectively. When a pump is not running or working at full capacity it can cause water pressure problems because insufficient water is being pumped. You need to invest in a new pump that will function at optimum level.

Before removing the pump, it is a good idea to check for other issues that can be responsible for the same symptom. A common cause of pressure problem is a faulty pressure tank. This equipment helps to keep the pressure constant using an air-filled bladder. It is usually placed in the well house and if it does not work properly, the pressure will drop. You also need to look for leaks in the water pipes or pressure tank. If everything is fine above ground, the submersible pump is the most likely culprit.

The water is running constantly

Another sign that you have a problem is if the pump runs constantly. This is a good sign that the equipment is encountering some serious problems and it can go out at any time. If the submersible pump continues to run without stopping, you could have a bad sensor or shutoff switch. It can also mean that the pump is struggling to get water up to the surface.

If you are experiencing problems or if you have concerns about your well pump, you need to consider getting professional help. Talk to a reputable service provider about a well pump replacement service available and let them guide you on what’s best for your well water system.

Protecting your drinking water supply is very important and it can help to prevent serious health problems. You have to make sure that the water coming from your well is safe for use. Pollution is a serious problem that affects the quality of well water and you have to make sure that you know how to identify and avoid potential problems. Pollution can come from different sources including rainwater or snowmelt. The runoff picks up pollutants as it moves before depositing them into the water source.

When polluted runoff gets into the well, it can be difficult and costly to clean it up. This means that it is easier to take action to deal with the situation before it becomes a problem. Knowing how to reduce the pollutants and to prevent them from getting into the water source is very important. Following are some steps that can help you to reduce pollution around the home when using well water.

Planning your yard and garden

If you have a well on your property, it is important to plan your garden and yard well to get the best results. Make sure that you choose the right spot for each plant. Native and sustainable plants are able to tolerate the site conditions that are specific to your land. This helps to reduce the need for using inputs like irrigation water, fertilizers and pesticides. It is also a good idea to recycle yard waste such as leaves, grass clippings, and plant prunings that are great for mulch or for compost. Yard waste can become a pollutant when it washes into water sources.

Using fertilizers with care

You need to be responsible when using fertilizers or pesticides in your garden. Make sure that you get soil tests before using the products and use them sparingly or responsibly. If you must use the products, consider using organic fertilizer. If you have pest problems, make sure that you identify the pests and use non-chemical treatment options where possible. It is a good idea to measure the area that you need to treat or fertilize and avoid handling or applying the chemicals near your water well.

Watering the yard and garden

When watering your garden or yard, you need to take measures to ensure that you do this correctly. Measure the weekly rainfall using a rain gauge before making up the difference you need with irrigation. It is recommended that you water the yard during the early morning hours before it gets too hot. A long and slow watering every week is adequate and if you have an inground sprinkler systems make sure that it has a manual control option. Use drip irrigation and low-flow hoses for beds and vegetable gardens.

When working on your landscaping, consider reducing the paved surfaces. This will help to decrease the runoff from your yard. You should also be careful about direct roof runoff that can soak into the ground. Find out the best ways to reduce soil erosion in your yard and garden. You can protect the soil using mulch, perennial vegetative cover, crushed stone or winter cover crops. You can make sure that your water is safe through the simple protective measures.

The main reason to have a domestic water well is so that you can have a reliable water source. When constructing or drilling a well, the experts have to ensure that they design a well that is capable of yielding the required results. The pumping rate has to be compatible with the household needs in order for it to be effective. This means that knowing the intended use is the first step when it comes to well construction. Well yield is the rate that the well can be pumped all the while making sure that the water remains at the desired level and does not go below the pump intake.

Factors affecting well yield

The well yield will depend on different factors notably the features of the aquifer, the well construction and the well maintenance. These factors are essential to ensure long-term yield sustainability. The features or characteristics of the aquifer vary from highly porous sands to clays that are low yielding and hard rock. Wells that are constructed in materials that are more porous will usually be high-yielding, while those completed in bedrock and clays that are less porous can slow down the groundwater flow.

Optimizing the yield

To get optimum results from the well, it is very important to ensure the right well construction techniques. The movement of water is an important factor when optimizing well yield. The screened part of the well allows water to get into the well while reducing or preventing transport of sand and silt. A screen that is improperly sized or one with slots that are too large or too small can allow sediment in the water to clog the well or grit to cause damage to the pump.

If the submersible pump is too shallow it can draw down the water levels too fast. A pump is required to go on and off repeatedly when the water table falls and rises and this often damages the pump. If the elevations of the water table drop after the well construction, the result is a decline in well yield.

Correcting low yield

There are several options for correcting low well yield. A well that is constructed in aquifers that are low-yielding can benefit from well deepening and lowering of the pump. If you have an open-borehole well, such as that constructed in bedrock, you can experience increased yield if the well is fractured or fracked. The process of hydro-fracking involves sealing some portions of the well in order to increase the pressure inside the borehole causing the rock to fracture. A large number and frequency of the fractures can increase yield.

Well maintenance can help to improve the yield. Surging and scrubbing the well piping and the screen is an efficient way to increase well yield by removing scale formation. An experienced and licensed pump installer will use a pump rig to ensure effective scrubbing. Well surging and scrubbing will help to remove slime, scale and other particles in the well. When you decide to get a well on your property, make sure that you work with professionals who are experienced in well drilling.

If you have a well on your property, you can consider yourself very fortunate at a time when water shortages are becoming common. The serious droughts that have been experienced in recent years have led people to look for alternative sources for their water needs. If you have a well water system and you have been wondering if the water you are consuming is safe, the good news is that there are ways to find out. A simple water test will help to give you the peace of mind that you need.

Signs to look out for

If you are worried about the water quality in your home, there must be a reason for this. Chances are that by the time you call in the experts, you suspect that you might have a problem. The fact is that your senses can tell you if all is not right. Long before you reach for the instruments, the taste, smell, look and touch can often help you to determine if your water contains contaminants. It is usually quite easy to know if there is a problem with your water.

Spot the problem

If your water has a yellow, orange, brown, red or cloudy appearance, it is safe to say that you have a problem in your hands. This can signal the presence of rust, iron or other contaminants that can usually be traced to the plumbing or water mains system. If your water has a green or blue hue it can mean that your plumbing is corroded thereby causing copper to get into your water. Good quality water should always be colorless and clear.

Smell the problem

If your water emits a rotten eggs odor, this is a good sign that you have a situation with hydrogen sulfide. This problem is usually caused by some type of bacteria and the water is usually salty-tasting. If the water smells more like pool water than drinking water, you have chlorine to blame for it. In some cases, chlorine is applied to water to disinfect it. If too much chlorine is used, you will not want to drink that water. Fortunately, there are other ways to treat drinking water that do not involve using chlorine.

Seeking solutions

It is one thing to know that you have a problem, but another to get the solution. Fortunately, that is where the experts come in. When you spot water contamination; you need to call in the professionals so that you can get a solution that is tailored to your needs. Dealing with water contamination can be a complex problem but fortunately, there are treatment and filtration systems that work effectively. The experts will use the test results to recommend the best system for you.

A number of chemicals such as mercury, copper, lead, iron or arsenic, can get into the well system. When this happens, your water will have a metallic taste or smell. These chemicals could be from the pipes and in this case, you will need to have the pipes replaced. Quality water is odorless and it should taste refreshing. This is not always simple especially when dealing with well water. Sometimes, water can contain undetected problems. Therefore, it is important to get regular water testing to make sure that your water is safe at all times.

If you have a water well as your primary water source, you need to make sure that your water is safe for use. An effective well water filtration system will help to ensure that your water is free of contaminants. The only way to determine the best filtration or purification system for your well is by getting well water testing. It is important to know that the physical characteristics of water and any contaminants it has will depend on the area and what happens on the land surrounding the well.

Well water testing

When you approach an expert about your well water filtration needs, the first thing they recommend should be testing. You should avoid dealing with anyone who is willing to sell you a filtration system without recommending testing or asking for water testing results. You can get all the information that you need about well water tests and the different water testing kits available. If you have already tested the water, you need to have the results with you when looking for a filtration system.

Get custom solutions

The results of your well water test come in handy when coming up with a custom solution. The well systems are custom assembled and they depend on the contaminants in the well water. There are different systems and they range from simple pieces to complex equipment. You can get exactly what you need to solve your well water problems and ensure that you have healthy water. When you work with a good company, you will not have to worry about spending more than you need for the best solution. The solution that works for one well owner will not necessarily work for the next.

Buy quality equipment

If you have specific well water filtration issues that you need to solve, you can get the best equipment to suit your needs. High quality systems remove manganese, iron, herbicides and hydrogen sulfide odors. You can even get systems that neutralize acid water through raising the pH as well as those that use Ultra Violet light to deal with bacterial contamination. There are well water filtration systems that remove mercury, arsenic, fluoride and nitrates among other contaminants. Talk to the experts about the best equipment for your specific needs.

Using natural methods

There are well water filtration systems that use natural methods to get rid of contaminants. If you want an eco-friendly system for your well, talk to the experts about the product details and specifications. Your well test results will determine whether the methods will be effective as well as what it will cost you. It is a good idea to talk to a company that has the right equipment as well as the necessary technical support to provide the best system to meet your needs.

Make sure that you work with a reputable service provider so that you can get all the help that you need. Water is very important for life and it is vital to ensure that the water that you are consuming is safe for you and your family.